Amplify+ is intended for outdoor
professional use, including
multi-dwelling units and commercial
applications. The product provides
separate UHF and VHF inputs for
two-antenna, band-specific
installations, as well as a
switchable FM trap.
Amplify+ is an outdoor
preamplifier designed for
mast-mounting with the TV
antenna(s). Professional installers
may choose options for High gain,
Low gain, FM signal blocking and
band-specific dual antenna use if
required.
Unlike the consumer-ready Amplify
product, Amplify+ does not include a
USB powering option for indoor use.
Outdoor Heavy-Duty Housing
Amplify+ is constructed of a
die-cast metal housing with
weatherproof ports to support
outdoor installations in extreme
weather conditions.
Adjustable Amplification
Amplify+ provides adjustable
settings that allow the installer to
select the appropriate gain required
for a specific installation
scenario, eliminating the potential
issues encountered from either too
much or too little gain. The
internal switch can be placed at
either a High or Low setting.
Adjustable FM Trap
Amplify+ provides a trap mechanism
to block unwanted FM Radio signals
from FM-enabled commercial TV
antennas, which can cause
interference with UHF and VHF
television signals. Pass-through of
FM signals can be enabled or
disabled via an internal switch.
LTE Filtering
Like the consumer-ready Amplify
product, Amplify+ provides LTE
signal filtering. The proliferation
of LTE signal towers and connected
LTE devices are a growing cause of
intermittent disruption of
over-the-air broadcast television
signals. These disruptions can
result in weak signals, pixilation
or even channel loss, and can be
especially disruptive when an
amplifier is used with a TV antenna.
What’s Included
AMPLIFY+ TV antenna amplifier
Power inserter
Power adapter
Mounting Ubolt
(2) Mounting Screws
Weather Boots
Installation Guide
Features
Improves signal quality
Dual Antenna Inputs (VHF & UHF)
Switchable FM Trap
Decreases pixilation
May increase number of channels
Ultra low noise
Adjustable gain
Blocks LTE interference from 3G/4G
Smartphones and transmitters
EMI & FM Out of band filtering
Heavy duty rating for outdoor use
Mast mounted for close proximity to
antenna
Technical Specifications
Impedance (Input and Output)
75 Ohm
Connector
F-type
Frequency range
54MHz~88MHz, 174MHz~260MHz, and
470MHz~685MHz
Gain VHF
23dB (High) / 16dB (Low)
Gain UHF
26dB (High) / 20dB (Low)
Gain Combined
23dB (High) / 16dB (Low)
Noise figure
1.5dB
UL listed
Yes
RoHS compliant
Yes
Return loss
<-15dB
Input Voltage
12-15 VDC
FM trap
95-108 MHz; >13dB
Operating temperature
-40 C to +60 C
Size (product)
3.25 x 5.25 x 7.75 in
Size (packaging)
8.125 x 3 x 5.125 in
Weight (product)
1.5 lb
Weight (packaging)
2 lb